FaxPress printing to the Ricoh Aficio 1027 Digital Imaging System

This document applies to:

Product(s): FaxPress

Last Revised: 6/1/02

 

SUMMARY

The Castelle FaxPress can be configured for each user to print confirmations and incoming faxes to a Network shared printer or to a printer connected to the FaxPress Parallel port.  The printer can be a PCL or Postscript printer.

 

DESCRIPTION

The FaxPress can print successfully to a Ricoh Aficio 1027 Digital Imaging System.  For this to work the Aficio 1027 must have the optional Postscript3 support enabled and the FaxPress User Properties “Printer Configuration” must be set to use the Postscript driver (see below).

 

 

 

 

---

DISCLAIMER

 

The Origin of this information may be internal or external to Castelle. Castelle makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Castelle makes no explicit or implied claims to the validity of this information. Castelle reserves the right to change, without notice, product offerings or specifications and the information in this document.

 

Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.

Test

© 2003 Castelle. Terms of use. Privacy Policy. Send feedback to webmaster@castelle.com.