HOWTO:  Integrate Siemens Hicom 300 PBX With FaxPress

Document ID: HT

This article applies to the following:

Product(s):  SBE/2500/5000/7000

Last Revised:  08/07/2001

Last Reviewed:

---

DISCUSSION

The FaxPress connects to the Siemens switch using standard analog ports.

First connect the FaxPress to one or more analog ports and put them into a hunt group together. Depending of the model of FaxPress it can support one to eight ports.

Direct the incoming DID numbers to this hunt group.

Configure the Analog ports for External Voice mail by setting EVMS to Yes.

---

Additional query words: Siemens, Hicom, pbx,

Keywords : DID,
Version :
Platform :
Issue type : kbhowto

---

DISCLAIMER

The Origin of this information may be internal or external to Castelle. Castelle makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Castelle makes no explicit or implied claims to the validity of this information. Castelle reserves the right to change, without notice, product offerings or specifications and the information in this document.

Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.